2 In 1 Manual & Auto Ranging Digital Multimeter

Auto Ranging Digital Multimeter

Measure Range:
– DC Voltage Range: 600mV/6V/60V/600V/1000V
– AC Voltage Range: 600mV/6V/60V/600mV/750V
– DC Current Range: 6000μA/600μA /60mA/600mA /10A
– AC Current Range: 6000μA/600μA /60mA/600mA /10A
– Resistance Range: 600Ω,6KΩ/60KΩ/600KΩ/6MΩ/60MΩ
– Capacitance Range: 60nf/600nf/6uf/60uf/600uf/6000uf
– Temperature Range: -20℃-1000℃/0℉-1832℉
– Frequency Range:10Hz/100Hz/1kHz/10kHz/100kHz/1/MHz/20MHz

Specifications:
Backlight: 15 sec
Automatic off: 15 min
Maximum display: 5999
Range selection: Auto / Manual Ranging
LCD display size: 3 inch
Display word high:21 mm
Over range indication: OL
Power: 9v battery(included)
True RMS
Low battery indication
Overload protection
No delay response
Low battery indicator
Continuous buzzer
Max/Min measurement

DC voltage measurement
Step 1. Insert the black test lead into the “COM” socket. The red test pen into the “V /Ω/ Hz” jack;
Step 2. Turn the range switch to the corresponding “DC Voltage” range and display the DC voltage measurement mode.
Step 3. The test pen to reliably touch the test point, the screen shows the measured
voltage value and the polarity of the touchpoint of the red pen.

AC voltage measurement
Step 1. Insert the black test lead into the “COM” socket while the red test leads into the “V /Ω/ Hz” jack.
Step 2. Turn the range switch to “AC Voltage” to display the AC voltage auto measurement mode.
Note: Do not input voltage exceed DC1000V or AC750V, if do, there will damage the instrument circuit

DC/AC Current Measurement
Step 1. Insert the black test lead into the “COM” socket, insert the red test lead into the “mA / uA” jack, or insert the red test lead into “10A” (max. 10A)
Step 2. Press the “SELECT” button to switch between AC and DC current
Step 3. Turn the range switch to the corresponding “DC/AC” position, connect the device to the circuit to test.
Step 4. The current value of the measured current and the polarity of the red test point will also be displayed on the screen at the same time.

Note:
Do not input current exceed 600mA or 10A
Before this multimeter connects the circuit to the test, please turn the power off first.
If there is no ideal of the measured current range in advance, switch to the highest range first.

So buy our latest: 2 In 1 Manual & Auto Ranging Digital Multimeter

Know more details about our all trendy products .